International Door & Operator Industry

JAN-FEB 2018

Garage door industry magazine for garage door dealers, garage door manufacturers, garage door distributors, garage door installers, loading docks, garage door operators and openers, gates, and tools for the door industry.

Issue link: http://idoi.epubxp.com/i/931157

Contents of this Issue

Navigation

Page 62 of 142

IDEA Three 2-Day Technical Schools Back by Popular Demand! Wednesday and Thursday, April 25-26, 2018 The IDEA will present three two-day schools Wednesday and Thursday, April 25-26, 2018. The two-day Rolling Steel/Rolling Steel Fire Door course will be presented along with a two-day school on Residential and Commercial Sectional Doors, plus the Automated Gate Systems Designer two-day school will be offered again. All run concurrently. The classes are intended for experienced technicians and are not hands-on training courses. Important Notes: • To register for either of the two-day schools, use the IDAExpo Registration Form, whether or not you intend to sit for one or more certification exams at the conclusion of the school. • To attend either of the schools and also sit for one or more certification exams, you must apply for the certification program(s) through IDEA. Visit www.dooreducation.com, and apply normally. Indicate on the IDEA Certification application form that you intend to take your exam at the "Two Day School." • Individuals will be permitted to take only the exam related to their chosen school. IDEA staff will notify all school attendees of the time and location of post-Exposition testing availability. • Fully registered IDAExpo attendees may attend all or any portion of either two-day school, as with any other educational program- ming taking place at the event. However, testing is not available to anyone who has not applied for the certification examination in advance of testing. • Individuals will be permitted to apply for certification on-site, but full payment is required before being allowed to sit for an examination. Wednesday, April 25, 2018 8:30 am - 10:00 am Introduction. Codes, Standards, and Industry Organizations. Components - Sections and Hardware 10:00 am - 11:45 am Components-Counterbalance, Track Types of Lifts Specialty Applications Specifications for Sectional Doors Methods of Operation 11:45 am - 1:00 pm Lunch break. (on your own) 1:00 pm - 2:45 pm Obtaining and Installing the Correct Door Operator Installation 3:00 pm - 4:00 pm One Piece Doors 4:15 pm - 5:30 pm Service & Operation Basic Math, Discussion Questions, Discussion Thursday, April 26, 2018 8:00 am - 9:00 am The Importance of Safety (combined groups) 9:30 am - 11:00 am Course Review Class Concludes 11:00 am - 1:00 pm Lunch and study time for certifi- cation candidates (on your own) 1:00 pm - 5:00 pm Certification Testing (combined groups) Pre-Application required for testing Wednesday, April 25, 2018 8:00 am - 10:00 am Introduction. Types of Doors. Codes, Standards, and Industry Organizations. Rolling Door Materials and Finishes. Components. 10:15 am - 11:45 am Types of Jambs. Methods of Operation. 11:45 am - 1:00 pm Lunch break. (on your own) 1:00 pm - 2:00 pm Fire Door Automatic Closing Devices. 2:30 pm - 4:00 pm Obtaining and Installing the Correct Rolling Door. 4:15 pm - 5:30 pm Electric Operator Installations. Service and Operation of Rolling Doors. Thursday, April 26, 2018 8:00 am - 9:00 am The Importance of Safety (combined groups) 9:30 am - 11:00 am Course Review Class Concludes 11:00 am - 1:00 pm Lunch and study time for certification candidates (on your own) 1:00 pm - 5:00 pm Certification Testing (combined groups) Pre-Application required for testing Rolling Steel/Rolling Steel Fire Doors 2-Day Schedule (Times are estimated and subject to change.) Res. & Comm. Sectional Doors 2-Day Schedule (Times are estimated and subject to change.) Wednesday, April 25, 2018 8:00 am - 11:45 am Introduction. First half of course. 11:45 am - 1:00 pm Lunch break. (on your own) 1:00 pm - 5:00 pm Conclusion of day one. Thursday, April 26, 2018 8:00 am - 11:00 am Continuation of Course Course Review Class Concludes 11:00 am - 1:00 pm Lunch and study time for certification candidates (on your own) 1:00 pm - 5:00 pm Certification Testing (combined groups) Pre-Application required for testing Automated Gate Systems Designer (Times are estimated and subject to change.) 60 International Door & Operator Industry™

Articles in this issue

Links on this page

Archives of this issue

view archives of International Door & Operator Industry - JAN-FEB 2018